Places to Visit

The Pure Water Occasional Home Page

The Pure Water Gazette

Pure Water Products

Fair Use Statement

Water Treatment Issues:

Acid Water

Algae, cyanotoxins

Alkalinity

Alum (Aluminum Sulfate)

Aluminum

Ammonia

Arsenic

Asbestos

Bacteria

Barium

Benzene

Bicarbonate Alkalinity

Boron (Borate, Boric Acid)

Brackish Water

Bromine

Bromate

Cadmium

Calcium

Carbon Dioxide

Carbon Tetrachloride

Chloramines

Chloride

Chlorine

Chromium

Color

Copper

Corrosion

Cryptosporidium

Cyanide

Dichloroethylene

Endocrine Disruptors

Fluoride

Giardia Lambia

Hardness

Heterotrophic Bacteria (HPC)

Hydrogen Sulfide

Iodine

Iron

Iron Bacteria

Lead

Magnesium

Manganese

Mercury

Methane

MTBE

Napthalene

Nickel

Nitrates and Nitrites

NMDA (N-Nitrosodimethylanime)

Norovirus

Odor

Organics

Perchloroethylene (PCE)

Perchlorate

Pesticides

pH

Pharmaceuticals

Radon

Radium

Selenium

Silica

Silver

Strontium

Sulfate

TDS (Total Dissolved Solids)

Trichlorethylene (TCE)

Tritium

Uranium

Vanadium

Vinyl Chloride

VOC


Ammonia

NH3, Ammonia Gas, is extremely soluble in water. It is the natural product of decay of organic nitrogen compounds. Although it is widely used and common in our society, ammonia can be both hazardous and caustic.

 

Source of ammonia in water

Ammonia gets into water supplies most frequently as runoff in agricultural areas where it is applied as fertilizer and it easily finds its way into underground aquifers from animal feedlot runoff. Ammonia itself is not often found in well water because bacteria in the soil convert it to nitrates.

Ammonia can be very corrosive to some copper plumbing systems.

Ammonia is not regulated by current drinking water standards.

Ammonia is toxic to fish and to dialysis patients. Its toxicity varies with the pH of the water.

Although ammonia is an irritant to the respiratory tract, the limited number of studies that have been conducted show no long-term ill effects. There is no evidence, for example, that ammonia can cause cancer. Go here for more details on health effects.

 

Removing Ammonia From Water

Ammonia is difficult to remove from water. It can be removed by cation exchange resin in the hydrogen form, which requires use of acid as a regenerant. Degasification can also be effective. Neither of these methods is easily adapted to residential use.

According to the WQA Technical Application Bulletin for Ammonia, it can be effectively and economically reduced in public and private water supplies by zeolite ion exchange regenerated with salt. Using sodium alumino silicate zeolites, reduction from 20 to 1 ppm can be achieved with flow rates of 4 gpm per square foot of resin.

The natural zeolite clinoptilolite, also regenerated with salt, is also an effective ammonia treatment.

For drinking water, distillation is an effective treatment.

Ammonia can be destroyed chemically by chlorination, but the resulting product is chloramine, which is also difficult to deal with.

 

Below is an interesting piece about ammonia reduction from Pure Water Products' main website:

Chloramine, which more than 30% of US cities now use as a disinfectant, is more difficult to remove from water than free chlorine. It can be removed with exactly the same treatment strategies that are used for chlorine, but greater contact time is needed.

Activated carbon is the best remover of free chlorine, and with enough residence time it removes chloramine effectively. However, when chloramine is involved in an oxidation-reduction reaction, ammonia is left behind, and ammonia is a severe problem for aquarium owners.

Reverse osmosis units with at least two carbon prefilters should remove chloramine nicely, but ammonia must still be dealt with.

According to Francis S. DeSilva ("Supplying DI Water for the aquarium industry" ) from Water Technology magazine's website:

Ammonia can be present in water in two forms, either ammonium hydroxide (NH3) or as the ammonium ion (NH4).

When the pH of the water is less than 7 the ammonia is present as the ammonium ion. As pH increases above 7, more of the ammonia is present as ammonium hydroxide.

The ammonium ion is readily removed by cation resin. Good removal capacity can be expected in waters low in hardness. Waters that are high in hardness will have decreased capacity due to the simultaneous affinity and removal of calcium, magnesium and the ammonium ion.

What this means is that an RO postfilter cartridge containing standard water softener resin should remove ammonia nicely.

Reverse osmosis removes the hardness and decreases the pH, assuring that the ammonia exists in the ammonium ion state that is readily removed by standard cation (water softening) resin.  

Here is a clip from another article on ion exchange which throws light on the same concept:

Ammonia

Ammonia is present in almost all waters to some degree. In many cases, it is deliberately added to chlorinated feedwaters to reduce THM precursors. It is well removed by deionization processes but not by softening.

The general approach to ammonia removal would be primary and polishing softeners. Ammonia is removed preferentially to sodium by cation resin, but is displaced by calcium and magnesium. Therefore, a single softener will remove ammonia during the initial part of its cycle but will then release the ammonia as it becomes exhausted with hardness.

Softening can be used effectively for ammonia removal if the primary softener is allowed to load to a hardness endpoint and a polishing softener is used to remove ammonia. In this case, the primary softener must not be operated to hardness breakthrough, as this would cause an ammonia spike and lead to elevated ammonia levels in the final product water.

 

 

Sources: Wikipedia, WQA Technical Application Bulletin, and Enting Engineering Handbook, Pure Water Products, Water Technology magazine.